Kliknite na sliku za pregled.

  • P-Sistem spojni elementi mogu se instalirati ili sa Zeta P2 električnim alatom ili pomoću CNC mašine.
  • Za upotrebu na CNC mašini potreban je P-Sistem rezač sa dijamantskim vrhom sa otvorom za alat 30 mm. Za sečenje žlebova P-sistema na ivici radnog komada pomoću ugaonog agregata koristi se glodalica čije dimenzije variraju u zavisnosti od jedinice i tipa mašine.
  • Karbidna burgija od 6 mm se koristi za uglove do 30 stepeni bez skretanja kada udari u površinu radnog komada. Ovo je neophodno za ugaone spojeve i druge spojeve pod uglom jer su otvori alata pod istim uglom kao i rez, što predstavlja opasnost od klizanja burgije.

Informacije za poručivanje

Naziv artiklaŠifra
P-System cutter DP 100.4 x 7 x 30 mm, 4 / 6.6 / DTK 48 mm, Z3L-132142
P-System cutter DP 100.4 x 7 x 40 mm, 4 / 5.5 / DTK 52 mm, Z3 L-132143
P-System cutter DP 100.4 x 7 x 16 mm, 4 / 5.5 / DTK 28 mm, Z3 L-132144
Cutter arbor 30 mm, DTK 48 mm, S 20 x 50, L = 102 mm L-132150
Cutter arbor 30 mm, DTK 48 mm, S 25 x 60, L = 102 mm L-132151
Cutter arbor 30 mm, DTK 48 mm, S 16 x 50, L = 85 mm L-132152
Cutter arbor 30 mm, DTK 48 mm, S 16 x 55, L = 68 mm L-132153
Cutter arbor 30 mm, DTK 48 mm, S 16 x 50, L = 85 mm “Weldon” L-132154
Cutter arbor 30 mm, DTK 48 mm, S 20 x 50, L = 85 mm “Weldon” L-132155
P-System CNC shaft tool cutter, solid carbide, shaft ø 12×40, L=80 mm L-131342
P-System CNC drill 6 mm, L=100 mm L-131556
P-System cutter DP 100.4 x 7 x 30 mm, 4 / 6.6 / DTK 48 mm, Z6 L-132145
P-System cutter DP 100.4 x 7 x 35 mm, 4 / 5.5 / DTK 50 mm, Z3 L-132148
P- P-System cutter DP 100.4 x 7 x 40 mm, 4 / 5.5 / DTK 50 mm, Z3 L-132143
LAMELLO 136312 15mmØ x 70mm x 10mm Shank Cabineo CNC Drill L-136312